Marcus Merighi
2017-07-04 17:50:04 UTC
Synopsis: xbacklight(1) - No outputs have backlight property
Category: xenocara
System : OpenBSD 6.1Category: xenocara
Details : OpenBSD 6.1-current (GENERIC.MP) #77: Sun Jul 2 19:57:16 MDT 2017
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Architecture: OpenBSD.amd64
Machine : amd64 on lenovo x220
lenovo x220 xbacklight(1) stopped working when upgrading to snapshot
#77: Sun Jul 2 19:57:16 MDT 2017.
error msg: No outputs have backlight property.
wsconsctl(8) display.brightness works, though.
dmesg short diff:
-OpenBSD 6.1-current (RAMDISK_CD) #4: Mon Jun 12 12:59:59 MDT 2017
+OpenBSD 6.1-current (RAMDISK_CD) #71: Mon Jul 3 12:17:53 MDT 2017
-cpu0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz, 2691.72 MHz
+cpu0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz, 2691.73 MHz
-cpu0: TSC frequency 2691719240 Hz
+cpu0: TSC frequency 2691729230 Hz
-cpu at mainbus0: not configured
-cpu at mainbus0: not configured
-sdmmc0: switch func mode 0 failed
-sdmmc0: mem init failed
-OpenBSD 6.1-current (GENERIC.MP) #4: Mon Jun 12 12:56:16 MDT 2017
+OpenBSD 6.1-current (GENERIC.MP) #77: Sun Jul 2 19:57:16 MDT 2017
-cpu0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz, 2691.71 MHz
+cpu0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz, 2691.66 MHz
-cpu0: TSC frequency 2691712080 Hz
+cpu0: TSC frequency 2691663480 Hz
-cpu1 at mainbus0: apid 1 (application processor)
-cpu1: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz, 2691.26 MHz
+cpu1 at mainbus0: apid 2 (application processor)
+cpu1: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz, 2691.27 MHz
-cpu1: smt 1, core 0, package 0
+cpu1: smt 0, core 1, package 0
-acpicpu0 at acpi0: C3(***@104 ***@0x415), C1(***@1 halt), PSS
-acpicpu1 at acpi0: C3(***@104 ***@0x415), C1(***@1 halt), PSS
-acpicpu2 at acpi0: C3(***@104 ***@0x415), C1(***@1 halt), PSS
-acpicpu3 at acpi0: C3(***@104 ***@0x415), C1(***@1 halt), PSS
+acpicpu0 at acpi0: C3(***@109 ***@0x416), C2(***@80 ***@0x414), C1(***@1 halt), PSS
+acpicpu1 at acpi0: C3(***@109 ***@0x416), C2(***@80 ***@0x414), C1(***@1 halt), PSS
+acpiac0 at acpi0: AC unit offline
run xbacklight(1).
use wsconsctl(8) display.brightness.
dmesg:
OpenBSD 6.1-current (GENERIC.MP) #77: Sun Jul 2 19:57:16 MDT 2017
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4156157952 (3963MB)
avail mem = 4024406016 (3837MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (64 entries)
bios0: vendor LENOVO version "8DET73WW (1.43 )" date 10/12/2016
bios0: LENOVO 4290N49
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA SSDT SSDT DMAR UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz, 2691.66 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2691663480 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz, 2691.27 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus 14 (EXP7)
acpicpu0 at acpi0: C3(***@109 ***@0x416), C2(***@80 ***@0x414), C1(***@1 halt), PSS
acpicpu1 at acpi0: C3(***@109 ***@0x416), C2(***@80 ***@0x414), C1(***@1 halt), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"PNP0303" at acpi0 not configured
"LEN0020" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1172" serial 13541 type LION oem "SANYO"
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2691 MHz: speeds: 2701, 2700, 2400, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address f0:de:f1:7e:37:89
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi, MIMO 2T2R, MoW, address 08:11:96:40:3e:18
ppb2 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 13
sdhc0 at pci3 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb3 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 14
xhci0 at pci4 dev 0 function 0 "NEC xHCI" rev 0x04: msi
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00 addr 1
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, MKNSSDTR480GB, P033> SCSI3 0/direct fixed naa.5888914304bcb000
sd0: 457862MB, 512 bytes/sector, 937703088 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
scsibus2 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SD/MMC, 58BGO, 0009> SCSI2 0/direct removable
sd1: 61087MB, 512 bytes/sector, 125106176 sectors
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (26c53c52ed3c64be.a) swap on sd0b dump on sd0b
usbdevs:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching Hub(0x0024), Intel(0x8087), rev 0.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 2 powered
port 3 powered
Controller /dev/usb1:
addr 1: super speed, self powered, config 1, xHCI root hub(0x0000), NEC(0x1033), rev 1.00
port 1 disabled
port 2 disabled
port 3 disabled
port 4 disabled
Controller /dev/usb2:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching Hub(0x0024), Intel(0x8087), rev 0.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
port 2 powered
port 3 powered