Roar Waagsbø
2017-06-01 11:47:24 UTC
Hi.
I tried to install openbsd 6.1 snapshot on a HP Elitebook 840 using a usb
installer.
I did dd if=pathto/install61.fs of=/dev/rsd1c bs=1m and got no error.
When I tried to boot from usb it booted and got to the prompt.
Then it hang on booting hd0a:bsd and sometime it made a beeping sound and
just hang there and I had to shut it down using the powerbutton.
I tried the usb stick on another laptop and that work.
I then booted from a archlinux usb on the same pc. dd a lot of zeroes to
/dev/sda and did dd miniroot61.fs to it and booted and now I got openbsd
installed.
stateless from #***@freenode told me to send you guys a bug report with
my dmesg info.
So on my HP Elitebook 840 after installing and connected a usb stick to it
I got this dmesg:
OpenBSD 6.1-current (RAMDISK_CD) #85: Wed May 31 19:09:46 MDT 2017
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 8442605568 (8051MB)
avail mem = 8182984704 (7803MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xa9e3f000 (31 entries)
bios0: vendor Hewlett-Packard version "M71 Ver. 01.09" date 09/01/2015
bios0: Hewlett-Packard HP EliteBook 840 G2
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SSDT MSDM FPDT BGRT SSDT
SSDT SSDT SSDT ASF!
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2195.20 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2195200800 Hz
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 40 pins
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP04)
acpiprt4 at acpi0: bus -1 (RP07)
acpiprt5 at acpi0: bus -1 (RP08)
acpiprt6 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
"HPQ6001" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"HPQ8002" at acpi0 not configured
"SYN3015" at acpi0 not configured
"HPQ6007" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"IFX0102" at acpi0 not configured
"INT340E" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel Core 5G HD Audio" rev 0x09 at pci0 dev 3 function 0 not configured
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address
fc:3f:db:8b:01:fc
"Intel 9 Series HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 2
rtsx0 at pci2 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ppb2 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi
pci3 at ppb2 bus 3
iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x48,
msi
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 0 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
"Intel 9 Series LPC" rev 0x03 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI
1.3
ahci0: port 1: 6.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: <ATA, SAMSUNG MZ7TE256, EXT0> SCSI3 0/direct
fixed naa.5002538844584d30
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
"Intel 9 Series SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhub1 at uhub0 port 1 configuration 1 interface 0 "vendor 0x8087 product
0x8001" rev 2.00/0.03 addr 2
umass0 at uhub1 port 2 configuration 1 interface 0 "Kingston DataTraveler
3.0" rev 2.10/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 3.0, PMAP> SCSI4
0/direct removable serial.09511666BF8049360066
sd1: 15004MB, 512 bytes/sector, 30728832 sectors
sdmmc0: can't enable card
uhub2 at uhub1 port 3 configuration 1 interface 0 "SMSC USB2134B" rev
2.10/60.82 addr 4
"vendor 0x8087 product 0x0a2a" rev 2.01/0.01 addr 5 at uhub1 port 4 not
configured
"SunplusIT INC. HP HD Webcam" rev 2.00/1.01 addr 6 at uhub1 port 7 not
configured
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
iwm0: could not read firmware iwm-7265-16 (error 2)
iwm0: failed to load init firmware
syncing disks...
OpenBSD 6.1-current (GENERIC.MP) #88: Wed May 31 19:06:15 MDT 2017
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8442605568 (8051MB)
avail mem = 8180940800 (7801MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xa9e3f000 (31 entries)
bios0: vendor Hewlett-Packard version "M71 Ver. 01.09" date 09/01/2015
bios0: Hewlett-Packard HP EliteBook 840 G2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SSDT MSDM FPDT BGRT SSDT
SSDT SSDT SSDT ASF!
acpi0: wakeup devices LANC(S5) EHC1(S3) XHC_(S3) PCIB(S5) NIC_(S5) RP04(S5)
WNIC(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2195.20 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2195203520 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2194.92 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2194.92 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2194.92 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP04)
acpiprt4 at acpi0: bus -1 (RP07)
acpiprt5 at acpi0: bus -1 (RP08)
acpiprt6 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(***@506 ***@0x60), C2(***@230 ***@0x33),
C1(***@1 mwait.1), PSS
acpicpu1 at acpi0: C3(***@506 ***@0x60), C2(***@230 ***@0x33),
C1(***@1 mwait.1), PSS
acpicpu2 at acpi0: C3(***@506 ***@0x60), C2(***@230 ***@0x33),
C1(***@1 mwait.1), PSS
acpicpu3 at acpi0: C3(***@506 ***@0x60), C2(***@230 ***@0x33),
C1(***@1 mwait.1), PSS
acpipwrres0 at acpi0: APPR, resource for HDEF
acpipwrres1 at acpi0: COMP, resource for COM1
acpipwrres2 at acpi0: LPP_, resource for LPT0
acpipwrres3 at acpi0: PXP2, resource for RP02
acpipwrres4 at acpi0: WRST
acpitz0 at acpi0: critical temperature is 128 degC
acpitz1 at acpi0: critical temperature is 128 degC
acpitz2 at acpi0: critical temperature is 128 degC
acpitz3 at acpi0: critical temperature is 128 degC
acpitz4 at acpi0: critical temperature is 128 degC
"HPQ6001" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"HPQ8002" at acpi0 not configured
"SYN3015" at acpi0 not configured
"HPQ6007" at acpi0 not configured
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
"PNP0C14" at acpi0 not configured
tpm0 at acpi0: GTPM, can't find address
"INT340E" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
cpu0: Enhanced SpeedStep 2195 MHz: speeds: 2201, 2200, 2100, 2000, 1800,
1700, 1600, 1500, 1300, 1200, 1100, 1000, 900, 700, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1600x900, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address
fc:3f:db:8b:01:fc
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek/0x0280
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 2
rtsx0 at pci2 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ppb2 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi
pci3 at ppb2 bus 3
iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x48,
msi
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 0 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI
1.3
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG MZ7TE256, EXT0> SCSI3 0/direct
fixed naa.5002538844584d30
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 0
int 18
iic0 at ichiic0
iic0: addr 0x2c 80=04 81=04 82=04 83=04 84=04 85=04 86=04 87=04 fd=01 words
00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub1 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.03 addr 2
uhub2 at uhub1 port 3 configuration 1 interface 0 "SMSC USB2134B" rev
2.10/60.82 addr 3
ugen0 at uhub1 port 4 "Intel Bluetooth" rev 2.01/0.01 addr 4
uvideo0 at uhub1 port 7 configuration 1 interface 0 "SunplusIT INC. HP HD
Webcam" rev 2.00/1.01 addr 5
video0 at uvideo0
sdmmc0: can't enable card
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (8e578263a1770725.a) swap on sd0b dump on sd0b
iwm0: could not read firmware iwm-7265-16 (error 2)
iwm0: failed to load init firmware
umass0 at uhub1 port 2 configuration 1 interface 0 "Kingston DataTraveler
3.0" rev 2.10/1.00 addr 6
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <Kingston, DataTraveler 3.0, 1.01> SCSI4
0/direct removable serial.09511666AEB080000461
sd1: 7416MB, 512 bytes/sector, 15187968 sectors
Regards Roar from Norway
I tried to install openbsd 6.1 snapshot on a HP Elitebook 840 using a usb
installer.
I did dd if=pathto/install61.fs of=/dev/rsd1c bs=1m and got no error.
When I tried to boot from usb it booted and got to the prompt.
Then it hang on booting hd0a:bsd and sometime it made a beeping sound and
just hang there and I had to shut it down using the powerbutton.
I tried the usb stick on another laptop and that work.
I then booted from a archlinux usb on the same pc. dd a lot of zeroes to
/dev/sda and did dd miniroot61.fs to it and booted and now I got openbsd
installed.
stateless from #***@freenode told me to send you guys a bug report with
my dmesg info.
So on my HP Elitebook 840 after installing and connected a usb stick to it
I got this dmesg:
OpenBSD 6.1-current (RAMDISK_CD) #85: Wed May 31 19:09:46 MDT 2017
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 8442605568 (8051MB)
avail mem = 8182984704 (7803MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xa9e3f000 (31 entries)
bios0: vendor Hewlett-Packard version "M71 Ver. 01.09" date 09/01/2015
bios0: Hewlett-Packard HP EliteBook 840 G2
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SSDT MSDM FPDT BGRT SSDT
SSDT SSDT SSDT ASF!
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2195.20 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2195200800 Hz
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 40 pins
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP04)
acpiprt4 at acpi0: bus -1 (RP07)
acpiprt5 at acpi0: bus -1 (RP08)
acpiprt6 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
"HPQ6001" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"HPQ8002" at acpi0 not configured
"SYN3015" at acpi0 not configured
"HPQ6007" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"IFX0102" at acpi0 not configured
"INT340E" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel Core 5G HD Audio" rev 0x09 at pci0 dev 3 function 0 not configured
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address
fc:3f:db:8b:01:fc
"Intel 9 Series HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 2
rtsx0 at pci2 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ppb2 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi
pci3 at ppb2 bus 3
iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x48,
msi
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 0 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
"Intel 9 Series LPC" rev 0x03 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI
1.3
ahci0: port 1: 6.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: <ATA, SAMSUNG MZ7TE256, EXT0> SCSI3 0/direct
fixed naa.5002538844584d30
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
"Intel 9 Series SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhub1 at uhub0 port 1 configuration 1 interface 0 "vendor 0x8087 product
0x8001" rev 2.00/0.03 addr 2
umass0 at uhub1 port 2 configuration 1 interface 0 "Kingston DataTraveler
3.0" rev 2.10/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 3.0, PMAP> SCSI4
0/direct removable serial.09511666BF8049360066
sd1: 15004MB, 512 bytes/sector, 30728832 sectors
sdmmc0: can't enable card
uhub2 at uhub1 port 3 configuration 1 interface 0 "SMSC USB2134B" rev
2.10/60.82 addr 4
"vendor 0x8087 product 0x0a2a" rev 2.01/0.01 addr 5 at uhub1 port 4 not
configured
"SunplusIT INC. HP HD Webcam" rev 2.00/1.01 addr 6 at uhub1 port 7 not
configured
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
iwm0: could not read firmware iwm-7265-16 (error 2)
iwm0: failed to load init firmware
syncing disks...
OpenBSD 6.1-current (GENERIC.MP) #88: Wed May 31 19:06:15 MDT 2017
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8442605568 (8051MB)
avail mem = 8180940800 (7801MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xa9e3f000 (31 entries)
bios0: vendor Hewlett-Packard version "M71 Ver. 01.09" date 09/01/2015
bios0: Hewlett-Packard HP EliteBook 840 G2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SSDT MSDM FPDT BGRT SSDT
SSDT SSDT SSDT ASF!
acpi0: wakeup devices LANC(S5) EHC1(S3) XHC_(S3) PCIB(S5) NIC_(S5) RP04(S5)
WNIC(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2195.20 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2195203520 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2194.92 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2194.92 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2194.92 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP04)
acpiprt4 at acpi0: bus -1 (RP07)
acpiprt5 at acpi0: bus -1 (RP08)
acpiprt6 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(***@506 ***@0x60), C2(***@230 ***@0x33),
C1(***@1 mwait.1), PSS
acpicpu1 at acpi0: C3(***@506 ***@0x60), C2(***@230 ***@0x33),
C1(***@1 mwait.1), PSS
acpicpu2 at acpi0: C3(***@506 ***@0x60), C2(***@230 ***@0x33),
C1(***@1 mwait.1), PSS
acpicpu3 at acpi0: C3(***@506 ***@0x60), C2(***@230 ***@0x33),
C1(***@1 mwait.1), PSS
acpipwrres0 at acpi0: APPR, resource for HDEF
acpipwrres1 at acpi0: COMP, resource for COM1
acpipwrres2 at acpi0: LPP_, resource for LPT0
acpipwrres3 at acpi0: PXP2, resource for RP02
acpipwrres4 at acpi0: WRST
acpitz0 at acpi0: critical temperature is 128 degC
acpitz1 at acpi0: critical temperature is 128 degC
acpitz2 at acpi0: critical temperature is 128 degC
acpitz3 at acpi0: critical temperature is 128 degC
acpitz4 at acpi0: critical temperature is 128 degC
"HPQ6001" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"HPQ8002" at acpi0 not configured
"SYN3015" at acpi0 not configured
"HPQ6007" at acpi0 not configured
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
"PNP0C14" at acpi0 not configured
tpm0 at acpi0: GTPM, can't find address
"INT340E" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
cpu0: Enhanced SpeedStep 2195 MHz: speeds: 2201, 2200, 2100, 2000, 1800,
1700, 1600, 1500, 1300, 1200, 1100, 1000, 900, 700, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1600x900, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address
fc:3f:db:8b:01:fc
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek/0x0280
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 2
rtsx0 at pci2 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ppb2 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi
pci3 at ppb2 bus 3
iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x48,
msi
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 0 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI
1.3
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG MZ7TE256, EXT0> SCSI3 0/direct
fixed naa.5002538844584d30
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 0
int 18
iic0 at ichiic0
iic0: addr 0x2c 80=04 81=04 82=04 83=04 84=04 85=04 86=04 87=04 fd=01 words
00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub1 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.03 addr 2
uhub2 at uhub1 port 3 configuration 1 interface 0 "SMSC USB2134B" rev
2.10/60.82 addr 3
ugen0 at uhub1 port 4 "Intel Bluetooth" rev 2.01/0.01 addr 4
uvideo0 at uhub1 port 7 configuration 1 interface 0 "SunplusIT INC. HP HD
Webcam" rev 2.00/1.01 addr 5
video0 at uvideo0
sdmmc0: can't enable card
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (8e578263a1770725.a) swap on sd0b dump on sd0b
iwm0: could not read firmware iwm-7265-16 (error 2)
iwm0: failed to load init firmware
umass0 at uhub1 port 2 configuration 1 interface 0 "Kingston DataTraveler
3.0" rev 2.10/1.00 addr 6
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <Kingston, DataTraveler 3.0, 1.01> SCSI4
0/direct removable serial.09511666AEB080000461
sd1: 7416MB, 512 bytes/sector, 15187968 sectors
Regards Roar from Norway