regression using vncviewer (net/ssvnc) on inteldrm

Discussion:

Paul de Weerd

2017-07-12 05:46:37 UTC

Yesterday I upgraded my workstation to a current snapshot and noticed
a big performance decrease in vncviewer. I have a session to a
machine running macOS at 1920x1080 (my setup consists of 2x 1920x1080
monitors, vncviewer is run in full screen on one of the two screens).
When vncviewer is on my active desktop, my mouse becomes sluggish on
the screen that doesn't show the vncviewer window.

Moving my mouse on the vncviewer window is basically unworkable: the
cursor is trailing behind movements by about half a second (it varies
a bit). When the screen is updated, you see it redrawing the full
screen. Changing workspaces on the remote machine (causing a full
screen redraw) takes ~15 seconds.

During all this, Xorg consumes ~12% CPU when the window is not active
but in view (nothing updating on the remote screen, expect the clock
every minute). Constantly moving my mouse in the vncviewer window,
Xorg eats 100% CPU, with ~25% system time and ~75% interrupt. Network
connectivity to the remote machine is gigabit ethernet (all local
traffic).

Note that vncviewer was never really blazing fast, but at least it was
workable. Obviously, vncviewer is doing something weird because other
programs don't seem affected by whatever changed (I'm guessing it's
the switch to using the modesetting driver on my hardware).

/var/run/dmesg.boot and /var/log/Xorg.0.log included below.

Cheers,

Paul

--- /var/run/dmesg.boot ----------------------------------------------
OpenBSD 6.1-current (GENERIC.MP) #94: Mon Jul 10 18:20:35 MDT 2017
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34243919872 (32657MB)
avail mem = 33200308224 (31662MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec410 (88 entries)
bios0: vendor Dell Inc. version "A12" date 05/06/2015
bios0: Dell Inc. OptiPlex 9020
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT SLIC LPIT SSDT SSDT SSDT HPET SSDT MCFG SSDT ASF! DMAR
acpi0: wakeup devices UAR1(S3) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S3) EHC2(S3) XHC_(S4) HDEF(S4) PEG0(S4) PEGP(S4) PEG1(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, 3392.85 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 3392845010 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, 3392.14 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, 3392.14 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, 3392.14 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, 3392.14 MHz
cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 1, core 0, package 0
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, 3392.14 MHz
cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 1, package 0
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, 3392.14 MHz
cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 1, core 2, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, 3392.14 MHz
cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu1 at acpi0: C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu2 at acpi0: C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu3 at acpi0: C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu4 at acpi0: C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu5 at acpi0: C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu6 at acpi0: C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu7 at acpi0: C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
"INT3F0D" at acpi0 not configured
"PNP0501" at acpi0 not configured
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 3392 MHz: speeds: 3401, 3400, 3200, 3000, 2800, 2700, 2500, 2300, 2100, 1900, 1700, 1500, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4600" rev 0x06
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
error: [drm:pid0:intel_pipe_config_compare] *ERROR* mismatch in has_audio (expected 1, found 0)
pipe state doesn't match!
error: [drm:pid0:intel_pipe_config_compare] *ERROR* mismatch in has_audio (expected 1, found 0)
pipe state doesn't match!
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x06: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 8 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 8 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address b8:ca:3a:93:03:e8
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Realtek/0x0280
audio0 at azalia1
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel Q87 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
ahci0: port 2: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct fixed naa.5002538d41b86e4d
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVD+-RW GT80N, A103> ATAPI 5/cdrom removable
sd1 at scsibus1 targ 2 lun 0: <ATA, WDC WD60EFRX-68L, 82.0> SCSI3 0/direct fixed naa.50014ee2b81f4111
sd1: 5723166MB, 512 bytes/sector, 11721045168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 8 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800
spdmem2 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800
spdmem3 at iic0 addr 0x53: 8GB DDR3 SDRAM PC3-12800
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhub3 at uhub0 port 20 configuration 1 interface 0 "VIA Labs, Inc. USB3.0 Hub" rev 3.00/90.91 addr 2
uhub4 at uhub3 port 1 configuration 1 interface 0 "VIA Labs, Inc. USB3.0 Hub" rev 3.00/90.91 addr 3
umass0 at uhub4 port 1 configuration 1 interface 0 "Western Digital My Passport 0748" rev 3.00/10.19 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <WD, My Passport 0748, 1019> SCSI4 0/direct fixed
sd2: 1907697MB, 512 bytes/sector, 3906963456 sectors
ses0 at scsibus2 targ 1 lun 1: <WD, SES Device, 1019> SCSI4 13/enclosure services fixed
ses0: unable to read enclosure configuration
umass1 at uhub4 port 2 configuration 1 interface 0 "Western Digital My Passport 0748" rev 3.00/10.10 addr 5
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd3 at scsibus3 targ 1 lun 0: <WD, My Passport 0748, 1010> SCSI4 0/direct fixed
sd3: 1907697MB, 512 bytes/sector, 3906963456 sectors
ses1 at scsibus3 targ 1 lun 1: <WD, SES Device, 1010> SCSI4 13/enclosure services fixed
ses1: unable to read enclosure configuration
umass2 at uhub4 port 4 configuration 1 interface 0 "Western Digital My Passport 0748" rev 3.00/10.10 addr 6
umass2: using SCSI over Bulk-Only
scsibus4 at umass2: 2 targets, initiator 0
sd4 at scsibus4 targ 1 lun 0: <WD, My Passport 0748, 1010> SCSI4 0/direct fixed
sd4: 1907697MB, 512 bytes/sector, 3906963456 sectors
ses2 at scsibus4 targ 1 lun 1: <WD, SES Device, 1010> SCSI4 13/enclosure services fixed
ses2: unable to read enclosure configuration
umass3 at uhub3 port 2 configuration 1 interface 0 "Western Digital My Passport 0748" rev 3.00/10.19 addr 7
umass3: using SCSI over Bulk-Only
scsibus5 at umass3: 2 targets, initiator 0
sd5 at scsibus5 targ 1 lun 0: <WD, My Passport 0748, 1019> SCSI4 0/direct fixed
sd5: 1907697MB, 512 bytes/sector, 3906963456 sectors
ses3 at scsibus5 targ 1 lun 1: <WD, SES Device, 1019> SCSI4 13/enclosure services fixed
ses3: unable to read enclosure configuration
umass4 at uhub3 port 3 configuration 1 interface 0 "Western Digital My Passport 0748" rev 3.00/10.19 addr 8
umass4: using SCSI over Bulk-Only
scsibus6 at umass4: 2 targets, initiator 0
sd6 at scsibus6 targ 1 lun 0: <WD, My Passport 0748, 1019> SCSI4 0/direct fixed
sd6: 1907697MB, 512 bytes/sector, 3906963456 sectors
ses4 at scsibus6 targ 1 lun 1: <WD, SES Device, 1019> SCSI4 13/enclosure services fixed
ses4: unable to read enclosure configuration
uhub5 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech Logitech Illuminated Keyboard" rev 2.00/55.01 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Logitech Logitech Illuminated Keyboard" rev 2.00/55.01 addr 3
uhidev1: iclass 3/0, 16 report ids
uhid0 at uhidev1 reportid 3: input=7, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhidev2 at uhub5 port 2 configuration 1 interface 0 "Logitech USB Gaming Mouse" rev 2.00/46.00 addr 4
uhidev2: iclass 3/1
ums0 at uhidev2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev3 at uhub5 port 2 configuration 1 interface 1 "Logitech USB Gaming Mouse" rev 2.00/46.00 addr 4
uhidev3: iclass 3/0, 17 report ids
uhid2 at uhidev3 reportid 16: input=6, output=6, feature=0
uhid3 at uhidev3 reportid 17: input=19, output=19, feature=0
uhidev4 at uhub5 port 3 configuration 1 interface 0 "RDing TEMPERHUM1V1.2" rev 2.00/0.01 addr 5
uhidev4: iclass 3/1, 1 report id
ukbd1 at uhidev4 reportid 1: 8 variable keys, 5 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev5 at uhub5 port 3 configuration 1 interface 1 "RDing TEMPERHUM1V1.2" rev 2.00/0.01 addr 5
uhidev5: iclass 3/1
ugold0 at uhidev5
ugen0 at uhub5 port 4 "Apple Inc. iPhone" rev 2.00/8.04 addr 6
uhub6 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
uhub7 at uhub6 port 3 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.90 addr 3
uhub8 at uhub7 port 1 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.90 addr 4
uvideo0 at uhub6 port 4 configuration 1 interface 0 "Logitech QuickCam Pro 9000" rev 2.00/0.08 addr 5
video0 at uvideo0
uaudio0 at uhub6 port 4 configuration 1 interface 2 "Logitech QuickCam Pro 9000" rev 2.00/0.08 addr 5
uaudio0: audio rev 1.00, 2 mixer controls
audio1 at uaudio0
uhub9 at uhub6 port 6 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.90 addr 6
ugold0: 2 sensors type si7006 (temperature and humidity)
uhub10 at uhub9 port 1 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.90 addr 7
umass5 at uhub10 port 1 configuration 1 interface 0 "Western Digital My Passport 0748" rev 2.10/10.19 addr 8
umass5: using SCSI over Bulk-Only
scsibus7 at umass5: 2 targets, initiator 0
sd7 at scsibus7 targ 1 lun 0: <WD, My Passport 0748, 1019> SCSI4 0/direct fixed
sd7: 1907697MB, 512 bytes/sector, 3906963456 sectors
ses5 at scsibus7 targ 1 lun 1: <WD, SES Device, 1019> SCSI4 13/enclosure services fixed
ses5: unable to read enclosure configuration
umass6 at uhub10 port 2 configuration 1 interface 0 "Western Digital My Passport 0748" rev 2.10/10.19 addr 9
umass6: using SCSI over Bulk-Only
scsibus8 at umass6: 2 targets, initiator 0
sd8 at scsibus8 targ 1 lun 0: <WD, My Passport 0748, 1019> SCSI4 0/direct fixed
sd8: 1907697MB, 512 bytes/sector, 3906963456 sectors
ses6 at scsibus8 targ 1 lun 1: <WD, SES Device, 1019> SCSI4 13/enclosure services fixed
ses6: unable to read enclosure configuration
umass7 at uhub10 port 3 configuration 1 interface 0 "Western Digital My Passport 0730" rev 2.10/10.08 addr 10
umass7: using SCSI over Bulk-Only
scsibus9 at umass7: 2 targets, initiator 0
sd9 at scsibus9 targ 1 lun 0: <WD, My Passport 0730, 1008> SCSI4 0/direct fixed
sd9: 953837MB, 512 bytes/sector, 1953458176 sectors
ses7 at scsibus9 targ 1 lun 1: <WD, SES Device, 1008> SCSI4 13/enclosure services fixed
ses7: unable to read enclosure configuration
umass8 at uhub10 port 4 configuration 1 interface 0 "Western Digital Elements 10B8" rev 2.10/10.12 addr 11
umass8: using SCSI over Bulk-Only
scsibus10 at umass8: 2 targets, initiator 0
sd10 at scsibus10 targ 1 lun 0: <WD, Elements 10B8, 1012> SCSI4 0/direct fixed serial.105810b835354C4C3435
sd10: 1907697MB, 512 bytes/sector, 3906963456 sectors
umass9 at uhub9 port 2 configuration 1 interface 0 "Western Digital My Passport 259D" rev 2.10/10.12 addr 12
umass9: using SCSI over Bulk-Only
scsibus11 at umass9: 2 targets, initiator 0
sd11 at scsibus11 targ 1 lun 0: <WD, My Passport 259D, 1012> SCSI4 0/direct fixed
sd11: 3815415MB, 512 bytes/sector, 7813969920 sectors
ses8 at scsibus11 targ 1 lun 1: <WD, SES Device, 1012> SCSI4 13/enclosure services fixed
ses8: unable to read enclosure configuration
umass10 at uhub9 port 3 configuration 1 interface 0 "Western Digital My Passport 259D" rev 2.10/10.12 addr 13
umass10: using SCSI over Bulk-Only
scsibus12 at umass10: 2 targets, initiator 0
sd12 at scsibus12 targ 1 lun 0: <WD, My Passport 259D, 1012> SCSI4 0/direct fixed
sd12: 3815415MB, 512 bytes/sector, 7813969920 sectors
ses9 at scsibus12 targ 1 lun 1: <WD, SES Device, 1012> SCSI4 13/enclosure services fixed
ses9: unable to read enclosure configuration
vscsi0 at root
scsibus13 at vscsi0: 256 targets
softraid0 at root
scsibus14 at softraid0: 256 targets
umass11 at uhub0 port 16 configuration 1 interface 0 "Western Digital My Passport 259D" rev 3.00/10.12 addr 9
umass11: using SCSI over Bulk-Only
scsibus15 at umass11: 2 targets, initiator 0
sd13 at scsibus15 targ 1 lun 0: <WD, My Passport 259D, 1012> SCSI4 0/direct fixed
sd13: 3815415MB, 512 bytes/sector, 7813969920 sectors
ses10 at scsibus15 targ 1 lun 1: <WD, SES Device, 1012> SCSI4 13/enclosure services fixed
ses10: unable to read enclosure configuration
sd14 at scsibus14 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd14: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd14a (5c0d9a38cc895a7d.a) swap on sd14b dump on sd14b
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
uhid0 detached
uhid1 detached
uhidev1 detached
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech Logitech Illuminated Keyboard" rev 2.00/55.01 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Logitech Logitech Illuminated Keyboard" rev 2.00/55.01 addr 3
uhidev1: iclass 3/0, 16 report ids
uhid0 at uhidev1 reportid 3: input=7, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
----------------------------------------------------------------------

--- /var/log/Xorg.0.log ----------------------------------------------
[ 70.933] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 70.933] linear framebuffer access unavailable
[ 70.936] (--) Using wscons driver on /dev/ttyC4
[ 70.944]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 70.944] X Protocol Version 11, Revision 0
[ 70.944] Build Operating System: OpenBSD 6.1 amd64
[ 70.944] Current Operating System: OpenBSD pom.alm.weirdnet.nl 6.1 GENERIC.MP#94 amd64
[ 70.944] Build Date: 10 July 2017 06:35:45PM
[ 70.944]
[ 70.944] Current version of pixman: 0.34.0
[ 70.944] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 70.944] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 70.944] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 11 19:52:10 2017
[ 70.945] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[ 70.946] (==) No Layout section. Using the first Screen section.
[ 70.946] (==) No screen section available. Using defaults.
[ 70.946] (**) |-->Screen "Default Screen Section" (0)
[ 70.946] (**) | |-->Monitor "<default monitor>"
[ 70.946] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 70.946] (==) Disabling SIGIO handlers for input devices
[ 70.947] (==) Automatically adding devices
[ 70.947] (==) Automatically enabling devices
[ 70.947] (==) Not automatically adding GPU devices
[ 70.947] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 70.952] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 70.952] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 70.952] (II) The server relies on wscons to provide the list of input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[ 70.952] (II) Loader magic: 0xc8e29a33020
[ 70.952] (II) Module ABI versions:
[ 70.952] X.Org ANSI C Emulation: 0.4
[ 70.952] X.Org Video Driver: 20.0
[ 70.952] X.Org XInput driver : 22.1
[ 70.952] X.Org Server Extension : 9.0
[ 70.952] (--) PCI:*(0:0:2:0) 8086:0412:1028:05a4 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 70.952] (II) LoadModule: "glx"
[ 70.954] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 70.961] (II) Module glx: vendor="X.Org Foundation"
[ 70.961] compiled for 1.18.4, module version = 1.0.0
[ 70.961] ABI class: X.Org Server Extension, version 9.0
[ 70.962] (==) AIGLX enabled
[ 70.962] (==) Matched modesetting as autoconfigured driver 0
[ 70.962] (==) Matched vesa as autoconfigured driver 1
[ 70.962] (==) Assigned the driver to the xf86ConfigLayout
[ 70.962] (II) LoadModule: "modesetting"
[ 70.962] (II) Loading /usr/X11R6/lib/modules/drivers/modesetting_drv.so
[ 70.963] (II) Module modesetting: vendor="X.Org Foundation"
[ 70.963] compiled for 1.18.4, module version = 1.18.4
[ 70.963] Module class: X.Org Video Driver
[ 70.963] ABI class: X.Org Video Driver, version 20.0
[ 70.963] (II) LoadModule: "vesa"
[ 70.963] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 70.963] (II) Module vesa: vendor="X.Org Foundation"
[ 70.963] compiled for 1.18.4, module version = 2.3.4
[ 70.963] Module class: X.Org Video Driver
[ 70.963] ABI class: X.Org Video Driver, version 20.0
[ 70.964] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 70.964] (II) VESA: driver for VESA chipsets: vesa
[ 70.964] (**) modeset(0): claimed PCI slot ***@0:2:0
[ 70.964] (II) modeset(0): using default device
[ 70.964] (WW) Falling back to old probe method for vesa
[ 70.965] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 70.965] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 70.965] (==) modeset(0): RGB weight 888
[ 70.965] (==) modeset(0): Default visual is TrueColor
[ 70.965] (II) Loading sub module "glamoregl"
[ 70.965] (II) LoadModule: "glamoregl"
[ 70.966] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so
[ 70.976] (II) Module glamoregl: vendor="X.Org Foundation"
[ 70.976] compiled for 1.18.4, module version = 1.0.0
[ 70.976] ABI class: X.Org ANSI C Emulation, version 0.4
[ 70.976] (II) glamor: OpenGL accelerated X.org driver based.
[ 71.011] (II) glamor: EGL version 1.4 (DRI2):
[ 71.023] (II) modeset(0): glamor initialized
[ 71.026] (II) modeset(0): Output VGA-1 has no monitor section
[ 71.051] (II) modeset(0): Output DP-1 has no monitor section
[ 71.087] (II) modeset(0): Output HDMI-1 has no monitor section
[ 71.112] (II) modeset(0): Output DP-2 has no monitor section
[ 71.148] (II) modeset(0): Output HDMI-2 has no monitor section
[ 71.150] (II) modeset(0): EDID for output VGA-1
[ 71.174] (II) modeset(0): EDID for output DP-1
[ 71.210] (II) modeset(0): EDID for output HDMI-1
[ 71.210] (II) modeset(0): Manufacturer: IVM Model: 610e Serial#: 453
[ 71.210] (II) modeset(0): Year: 2013 Week: 25
[ 71.210] (II) modeset(0): EDID Version: 1.3
[ 71.210] (II) modeset(0): Digital Display Input
[ 71.210] (II) modeset(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 71.211] (II) modeset(0): Gamma: 2.20
[ 71.211] (II) modeset(0): DPMS capabilities: Off
[ 71.211] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 71.211] (II) modeset(0): First detailed timing is preferred mode
[ 71.211] (II) modeset(0): redX: 0.641 redY: 0.338 greenX: 0.311 greenY: 0.619
[ 71.211] (II) modeset(0): blueX: 0.159 blueY: 0.059 whiteX: 0.313 whiteY: 0.329
[ 71.211] (II) modeset(0): Supported established timings:
[ 71.211] (II) modeset(0): ***@70Hz
[ 71.211] (II) modeset(0): ***@60Hz
[ 71.211] (II) modeset(0): ***@67Hz
[ 71.211] (II) modeset(0): ***@72Hz
[ 71.211] (II) modeset(0): ***@75Hz
[ 71.211] (II) modeset(0): ***@56Hz
[ 71.211] (II) modeset(0): ***@60Hz
[ 71.211] (II) modeset(0): ***@72Hz
[ 71.211] (II) modeset(0): ***@75Hz
[ 71.211] (II) modeset(0): ***@75Hz
[ 71.211] (II) modeset(0): ***@60Hz
[ 71.211] (II) modeset(0): ***@70Hz
[ 71.211] (II) modeset(0): ***@75Hz
[ 71.211] (II) modeset(0): ***@75Hz
[ 71.211] (II) modeset(0): Manufacturer's mask: 0
[ 71.211] (II) modeset(0): Supported standard timings:
[ 71.211] (II) modeset(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 71.211] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 71.211] (II) modeset(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 71.211] (II) modeset(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 71.211] (II) modeset(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 71.211] (II) modeset(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 71.211] (II) modeset(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 71.211] (II) modeset(0): Supported detailed timing:
[ 71.211] (II) modeset(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 71.211] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 71.211] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 71.211] (II) modeset(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 71.211] (II) modeset(0): Serial No: 11186V3600453
[ 71.211] (II) modeset(0): Monitor name: PL2481H
[ 71.211] (II) modeset(0): Supported detailed timing:
[ 71.211] (II) modeset(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 71.211] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 71.211] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 71.211] (II) modeset(0): Supported detailed timing:
[ 71.211] (II) modeset(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 71.211] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 71.211] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 71.211] (II) modeset(0): Supported detailed timing:
[ 71.211] (II) modeset(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 71.211] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 71.211] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 71.211] (II) modeset(0): Number of EDID sections to follow: 1
[ 71.211] (II) modeset(0): EDID (in hex):
[ 71.211] (II) modeset(0): 00ffffffffffff0026cd0e61c5010000
[ 71.211] (II) modeset(0): 1917010380341d782a2ac5a4564f9e28
[ 71.211] (II) modeset(0): 0f5054bfef00d1c081809500b3008140
[ 71.211] (II) modeset(0): 714f950f0101023a801871382d40582c
[ 71.211] (II) modeset(0): 450009252100001e000000fd00374c1e
[ 71.211] (II) modeset(0): 5311000a202020202020000000ff0031
[ 71.211] (II) modeset(0): 313138365633363030343533000000fc
[ 71.211] (II) modeset(0): 00504c32343831480a202020202001d6
[ 71.211] (II) modeset(0): 02031ff14c010203040510111213141e
[ 71.211] (II) modeset(0): 1f230907018301000065030c0010008c
[ 71.211] (II) modeset(0): 0ad08a20e02d10103e96000925210000
[ 71.211] (II) modeset(0): 18011d007251d01e206e285500092521
[ 71.211] (II) modeset(0): 00001e8c0ad090204031200c40550009
[ 71.211] (II) modeset(0): 25210000180000000000000000000000
[ 71.211] (II) modeset(0): 00000000000000000000000000000000
[ 71.211] (II) modeset(0): 0000000000000000000000000000004f
[ 71.211] (II) modeset(0): Printing probed modes for output HDMI-1
[ 71.211] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 71.211] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 71.211] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 71.211] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 71.211] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 71.211] (II) modeset(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 71.211] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 71.211] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 71.211] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 71.211] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 71.211] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 71.211] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 71.211] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 71.211] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 71.211] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 71.211] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 71.211] (II) modeset(0): Modeline "1440x576"x50.0 54.00 1440 1464 1592 1728 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 71.211] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 71.211] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 71.211] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 71.211] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 71.211] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 71.211] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 71.211] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 71.211] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 71.211] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 71.211] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 71.211] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 71.211] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 71.211] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 71.211] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 71.211] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 71.211] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 71.211] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 71.236] (II) modeset(0): EDID for output DP-2
[ 71.271] (II) modeset(0): EDID for output HDMI-2
[ 71.271] (II) modeset(0): Manufacturer: IVM Model: 610e Serial#: 151
[ 71.271] (II) modeset(0): Year: 2013 Week: 20
[ 71.271] (II) modeset(0): EDID Version: 1.3
[ 71.271] (II) modeset(0): Digital Display Input
[ 71.271] (II) modeset(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 71.271] (II) modeset(0): Gamma: 2.20
[ 71.271] (II) modeset(0): DPMS capabilities: Off
[ 71.271] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 71.271] (II) modeset(0): First detailed timing is preferred mode
[ 71.271] (II) modeset(0): redX: 0.641 redY: 0.338 greenX: 0.311 greenY: 0.619
[ 71.271] (II) modeset(0): blueX: 0.159 blueY: 0.059 whiteX: 0.313 whiteY: 0.329
[ 71.271] (II) modeset(0): Supported established timings:
[ 71.271] (II) modeset(0): ***@70Hz
[ 71.271] (II) modeset(0): ***@60Hz
[ 71.271] (II) modeset(0): ***@67Hz
[ 71.271] (II) modeset(0): ***@72Hz
[ 71.271] (II) modeset(0): ***@75Hz
[ 71.271] (II) modeset(0): ***@56Hz
[ 71.271] (II) modeset(0): ***@60Hz
[ 71.271] (II) modeset(0): ***@72Hz
[ 71.271] (II) modeset(0): ***@75Hz
[ 71.271] (II) modeset(0): ***@75Hz
[ 71.271] (II) modeset(0): ***@60Hz
[ 71.271] (II) modeset(0): ***@70Hz
[ 71.271] (II) modeset(0): ***@75Hz
[ 71.271] (II) modeset(0): ***@75Hz
[ 71.271] (II) modeset(0): Manufacturer's mask: 0
[ 71.271] (II) modeset(0): Supported standard timings:
[ 71.271] (II) modeset(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 71.271] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 71.271] (II) modeset(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 71.271] (II) modeset(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 71.271] (II) modeset(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 71.272] (II) modeset(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 71.272] (II) modeset(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 71.272] (II) modeset(0): Supported detailed timing:
[ 71.272] (II) modeset(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 71.272] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 71.272] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 71.272] (II) modeset(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 71.272] (II) modeset(0): Serial No: 11186V3500151
[ 71.272] (II) modeset(0): Monitor name: PL2481H
[ 71.272] (II) modeset(0): Supported detailed timing:
[ 71.272] (II) modeset(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 71.272] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 71.272] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 71.272] (II) modeset(0): Supported detailed timing:
[ 71.272] (II) modeset(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 71.272] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 71.272] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 71.272] (II) modeset(0): Supported detailed timing:
[ 71.272] (II) modeset(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 71.272] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 71.272] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 71.272] (II) modeset(0): Number of EDID sections to follow: 1
[ 71.272] (II) modeset(0): EDID (in hex):
[ 71.272] (II) modeset(0): 00ffffffffffff0026cd0e6197000000
[ 71.272] (II) modeset(0): 1417010380341d782a2ac5a4564f9e28
[ 71.272] (II) modeset(0): 0f5054bfef00d1c081809500b3008140
[ 71.272] (II) modeset(0): 714f950f0101023a801871382d40582c
[ 71.272] (II) modeset(0): 450009252100001e000000fd00374c1e
[ 71.272] (II) modeset(0): 5311000a202020202020000000ff0031
[ 71.272] (II) modeset(0): 313138365633353030313531000000fc
[ 71.272] (II) modeset(0): 00504c32343831480a20202020200110
[ 71.272] (II) modeset(0): 02031ff14c010203040510111213141e
[ 71.272] (II) modeset(0): 1f230907018301000065030c0010008c
[ 71.272] (II) modeset(0): 0ad08a20e02d10103e96000925210000
[ 71.272] (II) modeset(0): 18011d007251d01e206e285500092521
[ 71.272] (II) modeset(0): 00001e8c0ad090204031200c40550009
[ 71.272] (II) modeset(0): 25210000180000000000000000000000
[ 71.272] (II) modeset(0): 00000000000000000000000000000000
[ 71.272] (II) modeset(0): 0000000000000000000000000000004f
[ 71.272] (II) modeset(0): Printing probed modes for output HDMI-2
[ 71.272] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 71.272] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 71.272] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 71.272] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 71.272] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 71.272] (II) modeset(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 71.272] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 71.272] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 71.272] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 71.272] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 71.272] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 71.272] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 71.272] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 71.272] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 71.272] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 71.272] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 71.272] (II) modeset(0): Modeline "1440x576"x50.0 54.00 1440 1464 1592 1728 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 71.272] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 71.272] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 71.272] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 71.272] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 71.272] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 71.272] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 71.272] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 71.272] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 71.272] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 71.272] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 71.272] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 71.272] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 71.272] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 71.272] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 71.272] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 71.272] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 71.272] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 71.272] (II) modeset(0): Output VGA-1 disconnected
[ 71.272] (II) modeset(0): Output DP-1 disconnected
[ 71.272] (II) modeset(0): Output HDMI-1 connected
[ 71.272] (II) modeset(0): Output DP-2 disconnected
[ 71.272] (II) modeset(0): Output HDMI-2 connected
[ 71.272] (II) modeset(0): Using spanning desktop for initial modes
[ 71.272] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +0+0
[ 71.272] (II) modeset(0): Output HDMI-2 using initial mode 1920x1080 +1920+0
[ 71.272] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 71.272] (==) modeset(0): DPI set to (96, 96)
[ 71.272] (II) Loading sub module "fb"
[ 71.272] (II) LoadModule: "fb"
[ 71.273] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 71.275] (II) Module fb: vendor="X.Org Foundation"
[ 71.275] compiled for 1.18.4, module version = 1.0.0
[ 71.275] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.275] (II) UnloadModule: "vesa"
[ 71.275] (II) Unloading vesa
[ 71.275] (==) Depth 24 pixmap format is 32 bpp
[ 71.428] (==) modeset(0): Backing store enabled
[ 71.428] (==) modeset(0): Silken mouse disabled
[ 71.428] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 71.500] (==) modeset(0): DPMS enabled
[ 71.501] (WW) modeset(0): DRI2: glamor lacks support for pixmap import/export
[ 71.501] (II) modeset(0): [DRI2] Setup complete
[ 71.501] (II) modeset(0): [DRI2] DRI driver: i965
[ 71.501] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 71.516] (--) RandR disabled
[ 71.533] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 71.533] (II) AIGLX: enabled GLX_ARB_create_context
[ 71.533] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 71.533] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 71.533] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 71.533] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 71.533] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 71.533] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 71.533] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 71.533] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 71.533] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 71.533] (II) AIGLX: Loaded and initialized i965
[ 71.533] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 71.536] (II) modeset(0): Damage tracking initialized
[ 71.536] (II) modeset(0): Setting screen physical size to 1016 x 285
[ 71.646] (II) config/wscons: checking input device /dev/wskbd
[ 71.646] (II) wskbd: using layout us
[ 71.647] (II) LoadModule: "kbd"
[ 71.647] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 71.648] (II) Module kbd: vendor="X.Org Foundation"
[ 71.648] compiled for 1.18.4, module version = 1.9.0
[ 71.648] Module class: X.Org XInput Driver
[ 71.648] ABI class: X.Org XInput driver, version 22.1
[ 71.648] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 71.648] (**) /dev/wskbd: always reports core events
[ 71.648] (**) /dev/wskbd: always reports core events
[ 71.648] (**) Option "Protocol" "standard"
[ 71.648] (**) Option "XkbRules" "base"
[ 71.648] (**) Option "XkbModel" "pc105"
[ 71.648] (**) Option "XkbLayout" "us"
[ 71.648] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[ 71.841] (II) config/wscons: checking input device /dev/wsmouse
[ 71.841] (II) LoadModule: "ws"
[ 71.841] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 71.842] (II) Module ws: vendor="X.Org Foundation"
[ 71.842] compiled for 1.18.4, module version = 1.3.0
[ 71.842] Module class: X.Org XInput Driver
[ 71.842] ABI class: X.Org XInput driver, version 22.1
[ 71.842] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 71.842] (**) /dev/wsmouse: always reports core events
[ 71.842] (II) ws: /dev/wsmouse: debuglevel 0
[ 71.842] (**) Option "Device" "/dev/wsmouse"
[ 71.842] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 71.842] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 71.842] (**) ws: /dev/wsmouse: associated screen: 0
[ 71.843] (II) ws: /dev/wsmouse: minimum x position: 0
[ 71.843] (II) ws: /dev/wsmouse: maximum x position: 3839
[ 71.843] (II) ws: /dev/wsmouse: minimum y position: 0
[ 71.843] (II) ws: /dev/wsmouse: maximum y position: 1079
[ 71.843] (==) ws: /dev/wsmouse: Buttons: 7
[ 71.843] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 71.843] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7)
[ 71.843] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 71.843] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 71.843] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 71.843] (**) /dev/wsmouse: (accel) acceleration threshold: 4
----------------------------------------------------------------------

++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+

+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
http://www.weirdnet.nl/

Stuart Henderson

2017-07-12 12:11:25 UTC

Permalink

Post by Paul de Weerd
Note that vncviewer was never really blazing fast, but at least it was
workable. Obviously, vncviewer is doing something weird because other
programs don't seem affected by whatever changed (I'm guessing it's
the switch to using the modesetting driver on my hardware).

Confirmed here. Switching back to the intel driver fixes it:

Section "Device"
Identifier "Intel Graphics"
Driver "intel"
EndSection

inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics P4600" rev 0x06

OpenBSD 6.1-current (GENERIC.MP) #77: Sun Jul 2 19:57:16 MDT 2017
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8477265920 (8084MB)
avail mem = 8214556672 (7834MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec400 (90 entries)
bios0: vendor Dell Inc. version "A12" date 05/11/2017
bios0: Dell Inc. PowerEdge T20
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT SLIC LPIT SSDT SSDT SSDT HPET SSDT MCFG SSDT ASF! DMAR
acpi0: wakeup devices UAR1(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S3) EHC2(S3) XHC_(S4) HDEF(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3193.09 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 3193087240 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3192.60 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3192.60 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3192.60 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 4 (RP03)
acpiprt4 at acpi0: bus -1 (PEG0)
acpiprt5 at acpi0: bus -1 (PEG1)
acpiprt6 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu1 at acpi0: C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu2 at acpi0: C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpicpu3 at acpi0: C2(***@148 ***@0x33), C1(***@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
"INT3F0D" at acpi0 not configured
"PNP0501" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 3193 MHz: speeds: 3201, 3200, 3000, 2900, 2700, 2500, 2300, 2200, 2000, 1800, 1700, 1500, 1300, 1100, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics P4600" rev 0x06
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1200, 32bpp
error: [drm:pid0:intel_pipe_config_compare] *ERROR* mismatch in has_audio (expected 1, found 0)
pipe state doesn't match!
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 8 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 8 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address f8:b1:56:ac:32:76
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0280
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd4: msi
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "TI XIO2001 PCIE-PCI" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd4: msi
pci4 at ppb3 bus 4
em1 at pci4 dev 0 function 0 "Intel 82572EI" rev 0x06: apic 8 int 18, address 00:1b:21:2d:f7:0c
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel C226 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct fixed naa.5002538d4086e2f8
sd0: 476940MB, 512 bytes/sector, 976773168 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 8 int 18
iic0 at ichiic0
sdtemp0 at iic0 addr 0x19: mcp98243
sdtemp1 at iic0 addr 0x1b: mcp98243
spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
spdmem1 at iic0 addr 0x53: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uaudio0 at uhub0 port 4 configuration 1 interface 0 "EDIROL UA-1EX" rev 1.10/1.00 addr 2
uaudio0: audio rev 1.00, 0 mixer controls
audio1 at uaudio0
uhidev0 at uhub0 port 7 configuration 1 interface 0 "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 7 configuration 1 interface 1 "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 3
uhidev1: iclass 3/0, 4 report ids
ums0 at uhidev1 reportid 1: 3 buttons
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=1, feature=0
uhid2 at uhidev1 reportid 4: input=0, output=0, feature=4
uhub3 at uhub0 port 8 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/77.64 addr 4
uhub4 at uhub3 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/77.64 addr 5
uhub5 at uhub0 port 9 configuration 1 interface 0 "Texas Instruments product 0x8142" rev 2.10/1.00 addr 6
uhub6 at uhub5 port 4 configuration 1 interface 0 "Texas Instruments product 0x8142" rev 2.10/1.00 addr 7
uhub7 at uhub0 port 12 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev 2.00/92.24 addr 8
uhub7: device problem, disabling port 1
uftdi0 at uhub7 port 2 configuration 1 interface 0 "FTDI FT232R USB UART" rev 2.00/6.00 addr 9
ucom0 at uftdi0 portno 1
uhub8 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
uhub9 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (55d00535300500ff.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
umass0 at uhub7 port 1 configuration 1 interface 0 "asmedia ASMT1051" rev 2.10/1.00 addr 10
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <ASMT, 2115, 0> SCSI4 0/direct fixed serial.174c55aa123456789BBC
sd1: 122104MB, 512 bytes/sector, 250069680 sectors
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse0 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhidev1 detached
arp_rtrequest: bad gateway value: vlan5
uhidev0 at uhub0 port 7 configuration 1 interface 0 "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 7 configuration 1 interface 1 "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 3
uhidev1: iclass 3/0, 4 report ids
ums0 at uhidev1 reportid 1: 3 buttons
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=1, feature=0
uhid2 at uhidev1 reportid 4: input=0, output=0, feature=4
error: [drm:pid19653:intel_pipe_config_compare] *ERROR* mismatch in has_audio (expected 1, found 0)
pipe state doesn't match!
error: [drm:pid19653:intel_pipe_config_compare] *ERROR* mismatch in has_audio (expected 1, found 0)
pipe state doesn't match!
error: [drm:pid19653:intel_pipe_config_compare] *ERROR* mismatch in has_audio (expected 1, found 0)
pipe state doesn't match!
error: [drm:pid19653:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
error: [drm:pid19653:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=1688695 end=1688696) time 0 us, min 1192, max 1199, scanline start 1197, end 1200
error: [drm:pid19653:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
uhub7: device problem, disabling port 3
sd1 detached
scsibus4 detached
umass0 detached
uhub7: device problem, disabling port 3
uhub7: device problem, disabling port 4
aue0 at uhub0 port 11 configuration 1 interface 0 "ADMtek USB To LAN LAN Conve" rev 1.10/1.01 addr 10
aue0: address 00:00:e8:00:d6:df
acphy0 at aue0 phy 1: AC_UNKNOWN 10/100 PHY, rev. 0
acphy0 detached
aue0 detached
error: [drm:pid19653:intel_pipe_config_compare] *ERROR* mismatch in has_audio (expected 1, found 0)
pipe state doesn't match!
error: [drm:pid19653:intel_pipe_config_compare] *ERROR* mismatch in has_audio (expected 1, found 0)
pipe state doesn't match!

Mark Kettenis

2017-07-13 17:57:01 UTC

Permalink

Date: Wed, 12 Jul 2017 13:11:25 +0100

Section "Device"
Identifier "Intel Graphics"
Driver "intel"
EndSection

Is this regression important enough to hold off the commit of the
driver selection change until we have a better understanding of what
is going wrong here?

And does this only affect Haswell or are others also affected?

Stuart Henderson

2017-07-13 20:30:27 UTC

Permalink

Post by Mark Kettenis

Date: Wed, 12 Jul 2017 13:11:25 +0100

Section "Device"
Identifier "Intel Graphics"
Driver "intel"
EndSection

Is this regression important enough to hold off the commit of the
driver selection change until we have a better understanding of what
is going wrong here?

I don't think it's important enough to hold off at this point. We have
a viable workaround for now, imho we should get more people running with
modesetting to give us more experience with it.

Post by Mark Kettenis
And does this only affect Haswell or are others also affected?

I don't have much of a range of hardware to test with, but I've just
tried on an X201 (i7-620M - Ironlake), which is now using the modesetting
driver by default too, and doesn't have a problem with vncviewer.

Paul de Weerd

2017-07-14 07:19:37 UTC

Permalink

On Thu, Jul 13, 2017 at 09:30:27PM +0100, Stuart Henderson wrote:
| > > Section "Device"
| > > Identifier "Intel Graphics"
| > > Driver "intel"
| > > EndSection
| >
| > Is this regression important enough to hold off the commit of the
| > driver selection change until we have a better understanding of what
| > is going wrong here?
|
| I don't think it's important enough to hold off at this point. We have
| a viable workaround for now, imho we should get more people running with
| modesetting to give us more experience with it.

I agree with Stuart. The workaround (manually reverting back to the
intel driver) works fine when necessary.

Also, if there are other ports that are similarly affected, we should
probably find them sooner rather than later. Defaulting to
modesetting will help here, I think.

| > And does this only affect Haswell or are others also affected?
|
| I don't have much of a range of hardware to test with, but I've just
| tried on an X201 (i7-620M - Ironlake), which is now using the modesetting
| driver by default too, and doesn't have a problem with vncviewer.

I see the same problem on an i7-3537U (which I believe is Ivy Bridge;
dmesg and Xorg.0.log included below).

Cheers,

Paul

--- /var/run/dmesg.boot ----------------------------------------------
OpenBSD 6.1-current (GENERIC.MP) #95: Wed Jul 12 19:23:28 MDT 2017
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8110632960 (7734MB)
avail mem = 7859032064 (7494MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe1060 (72 entries)
bios0: vendor Dell Inc. version "A07" date 01/22/2013
bios0: Dell Inc. Dell System XPS L322X
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT ASF! HPET APIC MCFG TCPA FPDT SSDT SSDT UEFI UEFI MSDM UEFI SSDT DBG2
acpi0: wakeup devices P0P1(S4) EHC1(S4) EHC2(S4) XHC_(S4) PXSX(S4) RP01(S4) LID0(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz, 2494.79 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2494786800 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz, 2494.33 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz, 2494.33 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz, 2494.33 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(***@87 ***@0x31), C2(***@59 ***@0x10), C1(***@1 mwait.1), PSS
acpicpu1 at acpi0: C3(***@87 ***@0x31), C2(***@59 ***@0x10), C1(***@1 mwait.1), PSS
acpicpu2 at acpi0: C3(***@87 ***@0x31), C2(***@59 ***@0x10), C1(***@1 mwait.1), PSS
acpicpu3 at acpi0: C3(***@87 ***@0x31), C2(***@59 ***@0x10), C1(***@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 106 degC
acpitz1 at acpi0: critical temperature is 106 degC
"PNP0C14" at acpi0 not configured
"INT3F0D" at acpi0 not configured
"PNP0C32" at acpi0 not configured
acpials0 at acpi0: ALSD
"MSFT0001" at acpi0 not configured
"DLL058B" at acpi0 not configured
tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x32041114 rev 0x40
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: LID0
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "Dell" serial 1673 type LION oem "SIMPLO"
"INT340E" at acpi0 not configured
"INT33A0" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2501, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600, 1500, 1300, 1200, 1100, 1000, 800, 775 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0275, Intel/0x2806, using Realtek/0x0275
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 1
iwm0 at pci1 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0xbb, msi
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QS77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 850, EMT4> SCSI3 0/direct fixed naa.5002538d41688997
sd0: 476940MB, 512 bytes/sector, 976773168 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
axe0 at uhub0 port 1 configuration 1 interface 0 "Apple Computer Ethernet A1277" rev 2.00/0.01 addr 2
axe0: AX88772, address 78:31:c1:f2:23:37
ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI 0x000ec6, model 0x0006
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uvideo0 at uhub3 port 5 configuration 1 interface 0 "CN01RH7172487261D1VEA00 Laptop_Integrated_Webcam_1.3M" rev 2.00/27.10 addr 3
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub4 port 5 "Intel product 0x07dc" rev 2.00/0.01 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 409599MB, 512 bytes/sector, 838860783 sectors
root on sd1a (13fb6f1e389b2d9d.a) swap on sd1b dump on sd1b
iwm0: hw rev 0x140, fw ver 16.242414.0, address ac:fd:ce:33:1c:c9
----------------------------------------------------------------------

--- /var/log/Xorg.0.log ----------------------------------------------
[ 14.983] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 14.983] linear framebuffer access unavailable
[ 14.989] (--) Using wscons driver on /dev/ttyC4
[ 15.010]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 15.010] X Protocol Version 11, Revision 0
[ 15.010] Build Operating System: OpenBSD 6.1 amd64
[ 15.010] Current Operating System: OpenBSD kale.weirdnet.nl 6.1 GENERIC.MP#95 amd64
[ 15.010] Build Date: 12 July 2017 07:38:36PM
[ 15.010]
[ 15.010] Current version of pixman: 0.34.0
[ 15.010] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.010] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.010] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 14 09:06:37 2017
[ 15.012] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[ 15.015] (==) No Layout section. Using the first Screen section.
[ 15.015] (==) No screen section available. Using defaults.
[ 15.015] (**) |-->Screen "Default Screen Section" (0)
[ 15.015] (**) | |-->Monitor "<default monitor>"
[ 15.015] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 15.015] (==) Disabling SIGIO handlers for input devices
[ 15.016] (==) Automatically adding devices
[ 15.016] (==) Automatically enabling devices
[ 15.016] (==) Not automatically adding GPU devices
[ 15.017] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 15.030] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 15.030] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 15.030] (II) The server relies on wscons to provide the list of input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[ 15.031] (II) Loader magic: 0x110bbe933020
[ 15.031] (II) Module ABI versions:
[ 15.031] X.Org ANSI C Emulation: 0.4
[ 15.031] X.Org Video Driver: 20.0
[ 15.031] X.Org XInput driver : 22.1
[ 15.031] X.Org Server Extension : 9.0
[ 15.031] (--) PCI:*(0:0:2:0) 8086:0166:1028:058b rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00002000/64
[ 15.031] (II) LoadModule: "glx"
[ 15.034] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 15.062] (II) Module glx: vendor="X.Org Foundation"
[ 15.063] compiled for 1.18.4, module version = 1.0.0
[ 15.063] ABI class: X.Org Server Extension, version 9.0
[ 15.063] (==) AIGLX enabled
[ 15.063] (==) Matched modesetting as autoconfigured driver 0
[ 15.063] (==) Matched vesa as autoconfigured driver 1
[ 15.063] (==) Assigned the driver to the xf86ConfigLayout
[ 15.063] (II) LoadModule: "modesetting"
[ 15.063] (II) Loading /usr/X11R6/lib/modules/drivers/modesetting_drv.so
[ 15.065] (II) Module modesetting: vendor="X.Org Foundation"
[ 15.065] compiled for 1.18.4, module version = 1.18.4
[ 15.065] Module class: X.Org Video Driver
[ 15.065] ABI class: X.Org Video Driver, version 20.0
[ 15.065] (II) LoadModule: "vesa"
[ 15.065] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 15.066] (II) Module vesa: vendor="X.Org Foundation"
[ 15.066] compiled for 1.18.4, module version = 2.3.4
[ 15.066] Module class: X.Org Video Driver
[ 15.066] ABI class: X.Org Video Driver, version 20.0
[ 15.066] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 15.066] (II) VESA: driver for VESA chipsets: vesa
[ 15.067] (**) modeset(0): claimed PCI slot ***@0:2:0
[ 15.067] (II) modeset(0): using default device
[ 15.067] (WW) Falling back to old probe method for vesa
[ 15.067] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 15.067] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 15.067] (==) modeset(0): RGB weight 888
[ 15.068] (==) modeset(0): Default visual is TrueColor
[ 15.068] (II) Loading sub module "glamoregl"
[ 15.068] (II) LoadModule: "glamoregl"
[ 15.069] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so
[ 15.094] (II) Module glamoregl: vendor="X.Org Foundation"
[ 15.094] compiled for 1.18.4, module version = 1.0.0
[ 15.094] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.094] (II) glamor: OpenGL accelerated X.org driver based.
[ 15.207] (II) glamor: EGL version 1.4 (DRI2):
[ 15.244] (II) modeset(0): glamor initialized
[ 15.245] (II) modeset(0): Output eDP-1 has no monitor section
[ 15.520] (II) modeset(0): Output VGA-1 has no monitor section
[ 15.521] (II) modeset(0): Output HDMI-1 has no monitor section
[ 15.521] (II) modeset(0): Output DP-1 has no monitor section
[ 15.523] (II) modeset(0): EDID for output eDP-1
[ 15.523] (II) modeset(0): Manufacturer: CMN Model: 1345 Serial#: 0
[ 15.523] (II) modeset(0): Year: 2012 Week: 21
[ 15.523] (II) modeset(0): EDID Version: 1.4
[ 15.523] (II) modeset(0): Digital Display Input
[ 15.523] (II) modeset(0): 8 bits per channel
[ 15.523] (II) modeset(0): Digital interface is DisplayPort
[ 15.523] (II) modeset(0): Max Image Size [cm]: horiz.: 29 vert.: 17
[ 15.523] (II) modeset(0): Gamma: 2.20
[ 15.523] (II) modeset(0): No DPMS capabilities specified
[ 15.523] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 15.523] (II) modeset(0): First detailed timing is preferred mode
[ 15.523] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 15.523] (II) modeset(0): redX: 0.650 redY: 0.338 greenX: 0.329 greenY: 0.608
[ 15.523] (II) modeset(0): blueX: 0.148 blueY: 0.047 whiteX: 0.313 whiteY: 0.329
[ 15.523] (II) modeset(0): Manufacturer's mask: 0
[ 15.523] (II) modeset(0): Supported detailed timing:
[ 15.523] (II) modeset(0): clock: 138.8 MHz Image Size: 294 x 165 mm
[ 15.523] (II) modeset(0): h_active: 1920 h_sync: 1966 h_sync_end 1996 h_blank_end 2080 h_border: 0
[ 15.523] (II) modeset(0): v_active: 1080 v_sync: 1082 v_sync_end 1086 v_blanking: 1112 v_border: 0
[ 15.523] (II) modeset(0): Supported detailed timing:
[ 15.523] (II) modeset(0): clock: 92.5 MHz Image Size: 294 x 165 mm
[ 15.524] (II) modeset(0): h_active: 1920 h_sync: 1966 h_sync_end 1996 h_blank_end 2080 h_border: 0
[ 15.524] (II) modeset(0): v_active: 1080 v_sync: 1082 v_sync_end 1086 v_blanking: 1112 v_border: 0
[ 15.524] (II) modeset(0): VKWJC�133HSE
[ 15.524] (II) modeset(0): Unknown vendor-specific block 0
[ 15.524] (II) modeset(0): EDID (in hex):
[ 15.524] (II) modeset(0): 00ffffffffffff000dae451300000000
[ 15.524] (II) modeset(0): 15160104a51d117802a705a656549b26
[ 15.524] (II) modeset(0): 0c505400000001010101010101010101
[ 15.524] (II) modeset(0): 010101010101363680a0703820402e1e
[ 15.524] (II) modeset(0): 240026a51000001a242480a070382040
[ 15.524] (II) modeset(0): 2e1e240026a51000001a000000fe0056
[ 15.524] (II) modeset(0): 4b574a43803133334853450a00000000
[ 15.524] (II) modeset(0): 000a4131a3001000000a010a20200023
[ 15.524] (II) modeset(0): Printing probed modes for output eDP-1
[ 15.524] (II) modeset(0): Modeline "1920x1080"x60.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 +hsync -vsync (66.7 kHz eP)
[ 15.524] (II) modeset(0): Modeline "1920x1080"x40.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 +hsync -vsync (44.5 kHz e)
[ 15.524] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 15.524] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 15.524] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 15.524] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 15.524] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 15.524] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 15.524] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 15.524] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 15.524] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 15.524] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 15.524] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 15.524] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 15.524] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 15.524] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 15.524] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 15.524] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 15.524] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 15.524] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 15.524] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 15.799] (II) modeset(0): EDID for output VGA-1
[ 15.800] (II) modeset(0): EDID for output HDMI-1
[ 15.801] (II) modeset(0): EDID for output DP-1
[ 15.801] (II) modeset(0): Output eDP-1 connected
[ 15.801] (II) modeset(0): Output VGA-1 disconnected
[ 15.801] (II) modeset(0): Output HDMI-1 disconnected
[ 15.801] (II) modeset(0): Output DP-1 disconnected
[ 15.801] (II) modeset(0): Using exact sizes for initial modes
[ 15.801] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 15.801] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 15.801] (==) modeset(0): DPI set to (96, 96)
[ 15.801] (II) Loading sub module "fb"
[ 15.801] (II) LoadModule: "fb"
[ 15.803] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 15.806] (II) Module fb: vendor="X.Org Foundation"
[ 15.806] compiled for 1.18.4, module version = 1.0.0
[ 15.806] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.806] (II) UnloadModule: "vesa"
[ 15.806] (II) Unloading vesa
[ 15.807] (==) Depth 24 pixmap format is 32 bpp
[ 16.192] (==) modeset(0): Backing store enabled
[ 16.192] (==) modeset(0): Silken mouse disabled
[ 16.195] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 16.204] (==) modeset(0): DPMS enabled
[ 16.207] (WW) modeset(0): DRI2: glamor lacks support for pixmap import/export
[ 16.209] (II) modeset(0): [DRI2] Setup complete
[ 16.209] (II) modeset(0): [DRI2] DRI driver: i965
[ 16.209] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 16.221] (--) RandR disabled
[ 16.271] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 16.273] (II) AIGLX: enabled GLX_ARB_create_context
[ 16.273] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 16.273] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 16.273] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 16.273] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 16.273] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 16.273] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 16.273] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 16.273] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 16.273] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 16.273] (II) AIGLX: Loaded and initialized i965
[ 16.273] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 16.284] (II) modeset(0): Damage tracking initialized
[ 16.284] (II) modeset(0): Setting screen physical size to 508 x 285
[ 16.656] (II) config/wscons: checking input device /dev/wskbd
[ 16.657] (II) wskbd: using layout us
[ 16.657] (II) LoadModule: "kbd"
[ 16.659] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 16.660] (II) Module kbd: vendor="X.Org Foundation"
[ 16.660] compiled for 1.18.4, module version = 1.9.0
[ 16.660] Module class: X.Org XInput Driver
[ 16.660] ABI class: X.Org XInput driver, version 22.1
[ 16.660] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 16.660] (**) /dev/wskbd: always reports core events
[ 16.660] (**) /dev/wskbd: always reports core events
[ 16.660] (**) Option "Protocol" "standard"
[ 16.660] (**) Option "XkbRules" "base"
[ 16.660] (**) Option "XkbModel" "pc105"
[ 16.660] (**) Option "XkbLayout" "us"
[ 16.660] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[ 16.894] (II) config/wscons: checking input device /dev/wsmouse
[ 16.894] (II) LoadModule: "ws"
[ 16.897] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 16.900] (II) Module ws: vendor="X.Org Foundation"
[ 16.900] compiled for 1.18.4, module version = 1.3.0
[ 16.900] Module class: X.Org XInput Driver
[ 16.900] ABI class: X.Org XInput driver, version 22.1
[ 16.900] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 16.900] (**) /dev/wsmouse: always reports core events
[ 16.900] (II) ws: /dev/wsmouse: debuglevel 0
[ 16.900] (**) Option "Device" "/dev/wsmouse"
[ 16.900] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 16.900] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 16.900] (**) ws: /dev/wsmouse: associated screen: 0
[ 17.127] (II) ws: /dev/wsmouse: minimum x position: 0
[ 17.127] (II) ws: /dev/wsmouse: maximum x position: 1919
[ 17.127] (II) ws: /dev/wsmouse: minimum y position: 0
[ 17.127] (II) ws: /dev/wsmouse: maximum y position: 1079
[ 17.127] (==) ws: /dev/wsmouse: Buttons: 7
[ 17.130] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 17.130] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7)
[ 17.356] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 17.356] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 17.356] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 17.356] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 35.145] (II) modeset(0): EDID vendor "CMN", prod id 4933
[ 35.145] (II) modeset(0): Printing DDC gathered Modelines:
[ 35.145] (II) modeset(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 +hsync -vsync (66.7 kHz eP)
[ 35.145] (II) modeset(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 +hsync -vsync (44.5 kHz e)
----------------------------------------------------------------------

++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+

+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
http://www.weirdnet.nl/

Raf Czlonka

2017-07-14 09:09:42 UTC

Permalink

Post by Paul de Weerd
| > > Section "Device"
| > > Identifier "Intel Graphics"
| > > Driver "intel"
| > > EndSection
| >
| > Is this regression important enough to hold off the commit of the
| > driver selection change until we have a better understanding of what
| > is going wrong here?
|
| I don't think it's important enough to hold off at this point. We have
| a viable workaround for now, imho we should get more people running with
| modesetting to give us more experience with it.
I agree with Stuart. The workaround (manually reverting back to the
intel driver) works fine when necessary.
Also, if there are other ports that are similarly affected, we should
probably find them sooner rather than later. Defaulting to
modesetting will help here, I think.
| > And does this only affect Haswell or are others also affected?
|
| I don't have much of a range of hardware to test with, but I've just
| tried on an X201 (i7-620M - Ironlake), which is now using the modesetting
| driver by default too, and doesn't have a problem with vncviewer.
I see the same problem on an i7-3537U (which I believe is Ivy Bridge;
dmesg and Xorg.0.log included below).

I observe the same thing on i7-3770 (also Ivy Bridge) and the above
xorg.conf entry also resolves the issue for me.

Cheers,

Raf

OpenBSD 6.1-current (GENERIC.MP) #96: Thu Jul 13 19:31:55 MDT 2017
***@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8450408448 (8058MB)
avail mem = 8188510208 (7809MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeceb0 (83 entries)
bios0: vendor Dell Inc. version "A23" date 08/09/2016
bios0: Dell Inc. OptiPlex 7010
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT TCPA MCFG HPET SSDT SSDT SSDT DMAR ASF! SSDT SLIC BGRT
acpi0: wakeup devices P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) USB7(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.88 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 3392880640 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 1, core 0, package 0
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 1, package 0
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 1, core 2, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus -1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(***@80 ***@0x20), C2(***@59 ***@0x10), C1(***@1 mwait.1), PSS
acpicpu1 at acpi0: C3(***@80 ***@0x20), C2(***@59 ***@0x10), C1(***@1 mwait.1), PSS
acpicpu2 at acpi0: C3(***@80 ***@0x20), C2(***@59 ***@0x10), C1(***@1 mwait.1), PSS
acpicpu3 at acpi0: C3(***@80 ***@0x20), C2(***@59 ***@0x10), C1(***@1 mwait.1), PSS
acpicpu4 at acpi0: C3(***@80 ***@0x20), C2(***@59 ***@0x10), C1(***@1 mwait.1), PSS
acpicpu5 at acpi0: C3(***@80 ***@0x20), C2(***@59 ***@0x10), C1(***@1 mwait.1), PSS
acpicpu6 at acpi0: C3(***@80 ***@0x20), C2(***@59 ***@0x10), C1(***@1 mwait.1), PSS
acpicpu7 at acpi0: C3(***@80 ***@0x20), C2(***@59 ***@0x10), C1(***@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 106 degC
acpitz1 at acpi0: critical temperature is 106 degC
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"*pnp0c14" at acpi0 not configured
tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x0000104a rev 0x4e
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
cpu0: Enhanced SpeedStep 3392 MHz: speeds: 3401, 3400, 3300, 3100, 3000, 2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1200, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address b8:ca:3a:9a:e3:ef
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x1e47 rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct fixed naa.5002538d410ad27f
sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVD+-RW GT80N, A103> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800
spdmem1 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-12800
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2 rev 0x00
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhub3 at uhub0 port 3 configuration 1 interface 0 "Texas Instruments product 0x8142" rev 2.10/1.00 addr 2
uhub4 at uhub3 port 4 configuration 1 interface 0 "Texas Instruments product 0x8142" rev 2.10/1.00 addr 3
uhub5 at uhub0 port 4 configuration 1 interface 0 "Texas Instruments product 0x8142" rev 2.10/1.00 addr 4
uhub6 at uhub5 port 4 configuration 1 interface 0 "Texas Instruments product 0x8142" rev 2.10/1.00 addr 5
uhidev0 at uhub6 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/57.01 addr 6
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub6 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/57.01 addr 6
uhidev1: iclass 3/0, 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
uhub7 at uhub0 port 7 configuration 1 interface 0 "Texas Instruments product 0x8140" rev 3.00/1.00 addr 7
uhub8 at uhub7 port 4 configuration 1 interface 0 "Texas Instruments product 0x8140" rev 3.00/1.00 addr 8
uhub9 at uhub0 port 8 configuration 1 interface 0 "Texas Instruments product 0x8140" rev 3.00/1.00 addr 9
uhub10 at uhub9 port 4 configuration 1 interface 0 "Texas Instruments product 0x8140" rev 3.00/1.00 addr 10
uhub11 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev2 at uhub11 port 2 configuration 1 interface 0 "Philips Speech Processing product 0x091a" rev 1.00/3.02 addr 3
uhidev2: iclass 3/1
uhid3 at uhidev2: input=3, output=0, feature=0
uhub12 at uhub11 port 5 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 4
uhidev3 at uhub11 port 6 configuration 1 interface 0 "Holtek daskeyboard" rev 1.10/3.90 addr 5
uhidev3: iclass 3/1
ukbd0 at uhidev3: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev4 at uhub11 port 6 configuration 1 interface 1 "Holtek daskeyboard" rev 1.10/3.90 addr 5
uhidev4: iclass 3/1, 2 report ids
uhid4 at uhidev4 reportid 1: input=6, output=0, feature=0
uhid5 at uhidev4 reportid 2: input=1, output=0, feature=0
uhub13 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (b7cc2a8a249bd375.a) swap on sd0b dump on sd0b

[ 30.182] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 30.182] linear framebuffer access unavailable
[ 30.187] (--) Using wscons driver on /dev/ttyC4
[ 30.207]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 30.207] X Protocol Version 11, Revision 0
[ 30.207] Build Operating System: OpenBSD 6.1 amd64
[ 30.207] Current Operating System: OpenBSD itpc00.medschl.cam.ac.uk. 6.1 GENERIC.MP#96 amd64
[ 30.207] Build Date: 13 July 2017 07:47:00PM
[ 30.207]
[ 30.207] Current version of pixman: 0.34.0
[ 30.207] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.207] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.208] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 14 09:56:20 2017
[ 30.208] (==) Using config file: "/etc/xorg.conf"
[ 30.208] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[ 30.209] (==) No Layout section. Using the first Screen section.
[ 30.210] (==) No screen section available. Using defaults.
[ 30.210] (**) |-->Screen "Default Screen Section" (0)
[ 30.210] (**) | |-->Monitor "<default monitor>"
[ 30.210] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 30.210] (**) | |-->Device "Intel Graphics"
[ 30.210] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 30.210] (==) Disabling SIGIO handlers for input devices
[ 30.211] (==) Automatically adding devices
[ 30.211] (==) Automatically enabling devices
[ 30.211] (==) Not automatically adding GPU devices
[ 30.211] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 30.211] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 30.211] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 30.211] (II) The server relies on wscons to provide the list of input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[ 30.211] (II) Loader magic: 0x1008f9f33020
[ 30.211] (II) Module ABI versions:
[ 30.211] X.Org ANSI C Emulation: 0.4
[ 30.211] X.Org Video Driver: 20.0
[ 30.211] X.Org XInput driver : 22.1
[ 30.211] X.Org Server Extension : 9.0
[ 30.212] (--) PCI:*(0:0:2:0) 8086:0162:1028:0577 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 30.212] (II) LoadModule: "glx"
[ 30.213] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 30.224] (II) Module glx: vendor="X.Org Foundation"
[ 30.224] compiled for 1.18.4, module version = 1.0.0
[ 30.224] ABI class: X.Org Server Extension, version 9.0
[ 30.224] (==) AIGLX enabled
[ 30.225] (II) LoadModule: "intel"
[ 30.226] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 30.229] (II) Module intel: vendor="X.Org Foundation"
[ 30.229] compiled for 1.18.4, module version = 2.99.916
[ 30.229] Module class: X.Org Video Driver
[ 30.229] ABI class: X.Org Video Driver, version 20.0
[ 30.229] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 30.230] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 30.230] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 30.230] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 30.232] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[ 30.235] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 30.235] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 30.235] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.235] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 30.235] (==) intel(0): RGB weight 888
[ 30.235] (==) intel(0): Default visual is TrueColor
[ 30.237] (II) intel(0): Output VGA1 has no monitor section
[ 30.237] (II) intel(0): Enabled output VGA1
[ 30.237] (II) intel(0): Output HDMI1 has no monitor section
[ 30.237] (II) intel(0): Enabled output HDMI1
[ 30.238] (II) intel(0): Output DP1 has no monitor section
[ 30.238] (II) intel(0): Enabled output DP1
[ 30.238] (II) intel(0): Output HDMI2 has no monitor section
[ 30.238] (II) intel(0): Enabled output HDMI2
[ 30.238] (II) intel(0): Output DP2 has no monitor section
[ 30.238] (II) intel(0): Enabled output DP2
[ 30.238] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 30.238] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 30.238] (II) intel(0): Enabled output VIRTUAL1
[ 30.238] (--) intel(0): Output DP1 using initial mode 1920x1200 on pipe 0
[ 30.238] (--) intel(0): Output DP2 using initial mode 1920x1200 on pipe 1
[ 30.238] (==) intel(0): TearFree disabled
[ 30.238] (==) intel(0): DPI set to (96, 96)
[ 30.238] (II) Loading sub module "dri2"
[ 30.238] (II) LoadModule: "dri2"
[ 30.238] (II) Module "dri2" already built-in
[ 30.238] (II) Loading sub module "present"
[ 30.238] (II) LoadModule: "present"
[ 30.238] (II) Module "present" already built-in
[ 30.238] (==) Depth 24 pixmap format is 32 bpp
[ 30.242] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 30.242] (==) intel(0): Backing store enabled
[ 30.243] (==) intel(0): Silken mouse disabled
[ 30.243] (II) intel(0): HW Cursor enabled
[ 30.243] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 30.245] (==) intel(0): DPMS enabled
[ 30.246] (II) intel(0): [DRI2] Setup complete
[ 30.246] (II) intel(0): [DRI2] DRI driver: i965
[ 30.246] (II) intel(0): [DRI2] VDPAU driver: i965
[ 30.246] (II) intel(0): direct rendering: DRI2 enabled
[ 30.246] (II) intel(0): hardware support for Present enabled
[ 30.246] (--) RandR disabled
[ 30.315] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 30.315] (II) AIGLX: enabled GLX_ARB_create_context
[ 30.315] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 30.315] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 30.315] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 30.315] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 30.315] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 30.315] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 30.315] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 30.315] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 30.315] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 30.315] (II) AIGLX: Loaded and initialized i965
[ 30.315] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 30.322] (II) intel(0): switch to mode ***@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 30.331] (II) intel(0): switch to mode ***@60.0 on DP2 using pipe 1, position (0, 0), rotation normal, reflection none
[ 30.343] (II) intel(0): Setting screen physical size to 508 x 317
[ 30.487] (II) config/wscons: checking input device /dev/wskbd
[ 30.487] (II) wskbd: using layout gb
[ 30.487] (II) LoadModule: "kbd"
[ 30.488] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 30.488] (II) Module kbd: vendor="X.Org Foundation"
[ 30.488] compiled for 1.18.4, module version = 1.9.0
[ 30.488] Module class: X.Org XInput Driver
[ 30.488] ABI class: X.Org XInput driver, version 22.1
[ 30.488] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 30.488] (**) /dev/wskbd: always reports core events
[ 30.488] (**) /dev/wskbd: always reports core events
[ 30.489] (**) Option "Protocol" "standard"
[ 30.489] (**) Option "XkbRules" "base"
[ 30.489] (**) Option "XkbModel" "pc105"
[ 30.489] (**) Option "XkbLayout" "gb"
[ 30.489] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[ 30.712] (II) config/wscons: checking input device /dev/wsmouse
[ 30.712] (II) LoadModule: "ws"
[ 30.713] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 30.714] (II) Module ws: vendor="X.Org Foundation"
[ 30.714] compiled for 1.18.4, module version = 1.3.0
[ 30.714] Module class: X.Org XInput Driver
[ 30.714] ABI class: X.Org XInput driver, version 22.1
[ 30.714] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 30.714] (**) /dev/wsmouse: always reports core events
[ 30.714] (II) ws: /dev/wsmouse: debuglevel 0
[ 30.714] (**) Option "Device" "/dev/wsmouse"
[ 30.714] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 30.714] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 30.714] (**) ws: /dev/wsmouse: associated screen: 0
[ 30.714] (II) ws: /dev/wsmouse: minimum x position: 0
[ 30.714] (II) ws: /dev/wsmouse: maximum x position: 1919
[ 30.714] (II) ws: /dev/wsmouse: minimum y position: 0
[ 30.714] (II) ws: /dev/wsmouse: maximum y position: 1199
[ 30.714] (==) ws: /dev/wsmouse: Buttons: 7
[ 30.717] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 30.717] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7)
[ 30.717] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 30.717] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 30.717] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 30.717] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 76.719] (II) intel(0): resizing framebuffer to 3840x1200
[ 76.732] (II) intel(0): switch to mode ***@60.0 on DP2 using pipe 1, position (1920, 0), rotation normal, reflection none